International

 2022


[ 114 ] Hyung Doh Roh, Young-Bin Park*, “Carbon fiber grid sensor for structural deformation using piezoresistive behavior of carbon fiber”, Sensors and Actuators A: Physical, 2022. [DOI]

[ 113 ] Subir Biswas, Manash J. Baruah, Gautam Gogoi, Nazimul Hoque, Seonghwan Lee, Young-Bin Park, Lakshi Saikia, Kusum K.Bani, “Dehydrogenation of ethanol over CuO-Mg-Y for cross-aldol condensation with aryl aldehydes”, Microporous and Mesoporous Materials, 2022. [DOI]

[ 112 ] In-Yong Lee, Hyung Doh Roh, Hyung Wook Park, Young-Bin Park*, “Advanced non-destructive evaluation of impact damage growth in carbon-fiber-reinforced plastic by electromechanical analysis and machine learning clustering”, Composites Science and Technology, 2022. [DOI]

[ 111 ] In-Yong Lee, Hyung Doh Roh, Young-Bin Park*, “Prediction method for propagating crack length of carbon-fiber-based composite double cantilever beam using its electromechanical behavior and particle filter,” Composite Structures, 2022. [DOI]

 

 2021


[ 110 ] Biplab K. Deka, Ankita Hazarika, Myung-Jun Kwak, Dong Chan Kim, Anand Prakash Jaiswal, Hae Gu Lee, Jaewoo Seo, Changyoon Jeong, Ji-Hyun Jang, Young-Bin* Park, Hyung Wook Park, “Triboelectric nanogenerator-integrated structural supercapacitor with in situ MXene-dispersed N-doped Zn-Cu selenide nanostructured woven carbon fiber for energy harvesting and storage,” Energy Storage Materials, 2021 [DOI]

[ 109 ] Nazimul Hoque, Manash J. Baruah, Seonghwan Lee, Young-Bin Park*, Rupjyoti Dutta, Subhasish Roy, Kusum K. Bania, “Cu(OH)(2)-Ni(OH)(2) engulfed by zeolite-Y hydroxyl nest and multiwalled carbon nanotube for effective methanol oxidation reaction,” Electrochimica Acta, 2021.[DOI]

[ 108 ] Gautam Gogoi, Pinku Saikia, Manash J. Baruah, Seonghwan Lee, Young-Bin Park*, Rupjyoti Dutta, Kusum K. Bania,” Mixed valent copper oxide nanocatalyst on Zeolite-Y for mechanochemical oxidation, reduction and C-C bond formation reaction,” Microporous and Mesoporous Materials, 2021.[DOI]

[ 107 ] Changyoon Jeong, Sang-Ha Hwang, Byeong-Joo Kim, Han Gi Chae, and Young-Bin Park*, “Multilayered Composites with Modulus Gradient for Enhanced Pressure—Temperature Sensing Performance,” Sensors, 2021.[DOI]

[ 106 ] Hyung Doh Roh, Beom-Gon Cho, In-Yong Lee, and Young-Bin Park*, “Multi-scale Hybrid In situ Tow Scale Carbon Fiber Reinforced Thermoplastic Strain Sensor,” Composites Science and Technology, 2021.[DOI]

[ 105 ] Byeong-Joo Kim, Jinsik Kim, Sang-Hyup Cha, Yoon-Bo Shim, Changyoon Jeong, Namhun Kim, and Young-Bin Park*, “Interfacial Enhancements between a Three-Dimensionally Printed Honeycomb-Truss Core and Woven Carbon Fiber/Polyamide-6 Facesheets in Sandwich-Structured Composites,” Composites Part A, 2021. [DOI]

[ 104 ] Beom-Gon Cho, Shalik Ram Joshi, Jong Hun Han, Gun-Ho Kim*, and Young-Bin Park*, “Interphase Strengthening of Carbon Fiber/Polyamide 6 Composites through Mixture of Sizing Agent and Reduced Graphene Oxide Coating,” Composites Part A , 2021. [DOI]

[ 103 ] Ravi Kumar Cheedarala, M. N. Prabhakar, Beom Gon Cho, Young Bin Park, and Jung Il Song*,” Novel 3D-Networked Melamine–Naphthalene–Polyamic Acid Nanofillers Doped in Vinyl Ester Resin for Higher Flame Retardancy,” Materials Advances, 2021. [DOI]

[ 102 ] Hyung Doh Roh, Biplab K. Deka, and Young-Bin Park*, “Multifunctional Composite as a Structural Supercapacitor and Self-sensing Sensor using NiCo2O4 Nanowires and Ionic Liquid,” Composites Science and Technology, 2021. [DOI]

[ 101 ] Hyung Doh Roh, So Young Oh, and Young-Bin Park*, “Self-sensing Impact Damage in and Non-destructive Evaluation of Carbon-fiber Reinforced Polymers using Electrical Resistance and the Corresponding Electrical Route Models,” Sensors and Actuators: A. Physical, 2021. [DOI]

[ 100 ] In-Yong Lee, Hyung Doh Roh, and Young-Bin Park*, “Novel Structural Health Monitoring Method for CFRPs Using Electrical Resistance Based Probabilistic Sensing Cloud,” Composites Science and Technology, 2021. [DOI]

[ 99 ] Ankita Hazarika, Biplab K. Deka, Jae Woo Seo, Hoon Eui Jeong, Young-BinPark, and Hyung Wook Park*, “Porous Spongy FexCo1-xP Nanostructure and MXene Iinfused Self-powered Flexible Textile Based Personal Thermoregulatory Device,” Nano Energy, 86, 106042, August 1, 2021. [DOI]

[ 98 ] Dong-Jun Kwon, Neul-Sae-Rom Kim, Yeong-Jin Jang, Seong-Baek Yang, Jeong-Hyun Yeum, Ji-Hoon Jung, Sang-Yong Nam*, Young-Bin Park, Wooseok Ji*, “Investigation of Impact Resistance Performance of Carbon Fiber Reinforced Polypropylene Composites with Different Lamination to Applicate Fender Parts,” Composites Part B, 215, 108767, June 15, 2021. [DOI]

[ 97 ] Beom-Gon Cho, Shalik Ram Joshi, Seongjin Lee, Shin-Kwan Kim, Young-Bin Park*, and Gun-Ho Kim*, “Enhanced Mechanical and Antibacterial Properties of Nanocomposites Based on Poly(vinyl Alcohol) and Biopolymer-derived Reduced Graphene Oxide,” Polymers, 13(4), 615, February 18, 2021. [DOI]

 

 2020


[ 96 ] Ankita Hazarika, Biplab K.Deka, Do Young Kim, Young-BinPark, and Hyung WookPark*, “Smart Gating of the Flexible [email protected] and rGO-loaded Composite Based Personal Thermal Management Device Inspired by the Neuroanatomic Circuitry of Endotherms,” Chemical Engineering Journal, 127746, 2020. [DOI]

[ 95 ] Sooyoung Lee, Chaeyoung Hong, Taeseong Choi, Hye-gyu Kim, Seong-Woo Im, Soo-Chang Kang, Young-Bin Park, and Wooseok Ji*, “CSAI Analysis of Non-crimp Fabric Cross-ply Laminate Manufactured through Wet Compression Molding Process,” Composite Structures, 255, 113056, January 1, 2021. [DOI]

[ 94 ] Beom-Gon Cho, Jung-Eun Lee, Sang-Ha Hwang, Jong Hun Han, Han Gi Chae, and Young-Bin Park*, “Enhancement in Mechanical Properties of Polyamide 66-Carbon Fiber Composites Containing Graphene Oxide-Carbon Nanotube Hybrid Nanofillers Synthesized through in situ Interfacial Polymerization,” Composites Part A, 135, 105938, August 1, 2020. [DOI]

[ 93 ] Changyoon Jeong, Hangil Ko, Hyun-Tak Kim, Kahyun Sun, Tae-Hyuk Kwon*, Hoon Eui Jeong*, and Young-Bin Park*, “Bioinspired, High-Sensitivity Mechanical Sensors Realized with Hexagonal Microcolumnar Arrays Coated with Ultrasonic-Sprayed Single-Walled Carbon Nanotubes,” ACS Applied Materials and Interfaces, 12(16), pp. 18813–18822, April 1, 2020. [DOI]

[ 92 ] Beom-Gon Cho, Shalik Ram Joshi, Jaekyo Lee, Young-Bin Park* and Gun-Ho Kim*, “Direct Growth of Thermally Reduced Graphene Oxide on Carbon Fiber for Enhanced Mechanical Strength,” Composites Part B, 193, 108010, July 15, 2020. [DOI]

[ 91 ] Biplab Deka, Ankita Hazarika, Seonghwan Lee, Do-Young Kim, Young-Bin Park, and Hyung Wook Park*, “Triboelectric-nanogenerator-integrated Structural Supercapacitor Based on Highly Active P-doped Branched Cu–Mn Selenide Nanowires for Efficient Energy Harvesting and Storage,” Nano Energy, 73, 104754, July 1, 2020. [DOI]

[ 90 ] Yeong-Tae Jung, Hyung Doh Roh, In-Yong Lee, and Young-Bin Park*, “Strain Sensing and Progressive Failure Monitoring of Glass-fiber-reinforced Composites Using Percolated Carbon Nanotube Networks,” Functional Composites and Structures, 2(1), 015006, March 17, 2020. [DOI]

[ 89 ] Byeong-Joo Kim, Biplab Deka, Chanwoo Joung, and Young-Bin Park*, “Synergistic Mechanical Reinforcement of Woven Carbon Fiber/Polypropylene Composites Using Plasma Treatment and Nanoclay,” International Journal of Precision Engineering and Manufacturing-Green Technology, 2020. [DOI]

[ 88 ] Changyoon Jeong, Tae Hee Lee, Seung Man Noh* and Young-Bin Park*, “Real-time In Situ Monitoring of Manufacturing Process and CFRP Quality by Relative Resistance Change Measurement,” Polymer Testing, 85, 106416, February 28, 2020 (published online on February 9, 2020). [DOI]

[ 87 ] Changyoon Jeong and Young-Bin Park*, “Exfoliated Graphite Nanoplatelet-Carbon Nanotube Hybrid Composites for Compression Sensing,” ACS Omega, 5, 6, pp. 2630-2639 (published online on February 3, 2020). [DOI]

[ 86 ] Eunju Park, Dong Min Kim, Hyung Wook Park, Young-Bin Park, and Namhun Kim*, “Evaluation of Tool Life in the Dry Machining of Inconel 718 Parts from Additive Manufacturing (AM)” International Journal of Precision Engineering and Manufacturing, 21(1), pp. 57-65, 2020 (published online on December 31, 2019). [DOI]

[ 85 ] Changyoon Jeong, Seonghwan Lee, Hyung Doh Roh, Maria Q. Feng, and Young-Bin Park*, “Hierarchically Structured ZnO Nanorod-Carbon Fiber Composites as Ultrathin, Flexible, Highly Sensitive Triboelectric Sensors,” Smart Materials and Structures, 29, 025002, 2020 (published online on December 19, 2019). [DOI]

[ 84 ] Changyoon Jeong, Chanwoo Joung, Seonghwan Lee, Maria Q. Feng, and Young‑Bin Park*, “Carbon Nanocomposite Based Mechanical Sensing and Energy Harvesting,” International Journal of Precision Engineering and Manufacturing-Green Technology, 7(1), pp. 247-267, 2020 (published online on October 5, 2019). [DOI]

 

 2019


[ 83 ] Changyoon Jeong, Hangil Ko, Hoon Eui Jeong*, and Young-Bin Park*, “Shear-Pressure Multimodal Sensor Based on Flexible Cylindrical Pillar Array and Flat Structured Carbon Nanocomposites with Simple Fabrication Process,” Composites Science and Technology, 184, 107841, September 30, 2019. [DOI]

[ 82 ] Joel Renaud Ngouanom Gnidakouong, Joo-Hyung Kim, Hansang Kim, Young-Bin Park*, “Electromagnetic Interference Shielding Behavior of Hybrid Carbon Nanotube/Exfoliated Graphite Nanoplatelet Coated Glass Fiber Composites,” Materials Science and Engineering B, 248, 114403, 2019. [DOI]

[ 81 ] Biplab K. Deka, Ankita Hazarika, Jisoo Kim, Hoon Eui Jeong, Young-Bin Park, and Hyung Wook Park*, “Fabrication of the Piezoresistive Sensor Using the Continuous Laser-induced Nanostructure Growth for Structural Health Monitoring,” Carbon, 152, pp. 376-387, June 4, 2019. [DOI]

[ 80 ] Ankita Hazarika, Biplab K. Deka, Changyoon Jeong, Young-Bin Park, and Hyung Wook Park*, “Biomechanical Energy-Harvesting Wearable Textile-Based Personal Thermal Management Device Containing Epitaxially Grown Aligned Ag-Tipped-NixCo1−xSe Nanowires/Reduced Graphene Oxide,” Advanced Functional Materials, 29, 1903144, June 12, 2019. [DOI]

[ 79 ] Hyung Doh Roh, Soo-Young Lee, Eonyeon Jo, Hyegyu Kim, Wooseok Ji*, and Young-Bin Park*, “Deformation and Interlaminar Crack Propagation Sensing in Carbon Fiber Composites Using Electrical Resistance Measurement,” Composite Structures, 216, pp. 142-150, May 1, 2019. [DOI]

[ 78 ] Sehyeok Oh, Inyong Lee, Young-Bin Park, and Hyungson Ki*, “Investigation of Cut Quality in Fiber Laser Cutting of CFRP,” Optics and Laser Technology, 113, pp. 129-140, May 1, 2019. [DOI]

[ 77 ] Beom-Gon Cho, Sang-Ha Hwang, Miseon Park, Jong Kyoo Park, Young-Bin Park*, and Han Gi Chae*, “The Effects of Plasma Surface Treatment on the Mechanical Properties of Polycarbonate/Carbon Nanotube/Carbon Fiber Composites,” Composites Part B, 160, pp. 436-445, March 1, 2019. [DOI]

[ 76 ] Biplab K Deka, Ankita Hazarika, Jisoo Kim, Young-Bin Park, and Hyung Wook Park*, “Bimetallic Copper Cobalt Selenide Nanowire-anchored Woven Carbon Fiber-based Structural Supercapacitors,” Chemical Engineering Journal, 355, pp. 551-559, January 1, 2019. [DOI]

 

 2018


[ 75 ] Byeong-Joo Kim, Sang-Hyup Cha, Gu-Hyeok Kang, Kyungil Kong, Wooseok Ji, Hyung Wook Park, Young-Bin Park*, “Interfacial Control through ZnO Nanorod Growth on Plasma-treated Carbon Fiber for Multiscale Reinforcement of Carbon Fiber/Polyamide 6 Composites,” Materials Today Communications, 17, pp. 438-449, December 1, 2018. [DOI]

[ 74 ] Ankita Hazarika, Biplab Deka, Do-Young Kim, Hoon Eui Jeong, Young-Bin Park, and Hyung Wook Park*, “Woven Kevlar® Fiber/Polydimethylsiloxane/Reduced Graphene Oxide Composite based Personal Thermal Management with Freestanding Cu-Ni Core-shell Nanowires,” Nano Letters 18(11), pp. 6731-6739, October 5, 2018. [DOI]

[ 73 ] Beom-Gon Cho, Seonghwan Lee, Sang-Ha Hwang, Jong Hun Han, Han Gi Chae, and Young-Bin Park*, “Influence of Hybrid Graphene Oxide-Carbon Nanotube as a Nano-filler on the Interfacial Interaction in Nylon Composites Prepared by In Situ Interfacial Polymerization,” Carbon, 140, pp. 324-337, December 2018. [DOI]

[ 72 ] Byeong-Joo Kim, Sang-Hyup Cha, Kyungil Kong, Wooseok Ji, Hyung Wook Park, and Young-Bin Park*, “Synergistic Interfacial Reinforcement of Carbon Fiber/Polyamide 6 Composites Using Carbon-nanotube-modified Silane Coating on ZnO-nanorod-grown Carbon Fiber,” Composites Science and Technology,165, pp. 362-372, September 8, 2018. [DOI]

[ 71 ] Sang-Ha Hwang, Young-Bin Park*, Seung-Hyun Hur*, and Han Gi Chae*, “Pt Nanoparticle-Decorated Reduced Graphene Oxide Hydrogel for High-Performance Strain Sensor: Tailoring Piezoresistive Property by Controlled Microstructure of Hydrogel,” ACS Applied Nano Materials, 1(6), pp. 2836-2843, May 23, 2018. [DOI]

[ 70 ] Biraj Das, Mukesh Sharma, Biplab K. Deka, Ankita Hazarika, Young-Bin Park, Anil Hazarika, Suresh K. Bhargava*, and Kusum K. Bania*, “Facile Synthesis of 1D-Architecture of Silver-Vanadates in Carbon Nest for Enhanced Visible Light Driven Photo-oxidation Process,” Journal of Environmental Chemical Engineering, 6(2), pp. 3167-3176, April 2018. [DOI]

[ 69 ] Byeong-Joo Kim, Biplab Deka, Il-Joon Bae, Dong-Hyuk Choi, Dong-Il Son, and Young-Bin Park*, “Unidirectional Spread-tow Carbon Fiber/Polypropylene Composites Reinforced with Mechanically Aligned Multi-walled Carbon Nanotubes and Exfoliated Graphite Nanoplatelets,” Polymer Composites, 39(S2), pp. E1251-E1261, May 2018. [DOI]

[ 68 ] Byeong-Joo Kim, Sang-Hyup Cha, and Young-Bin Park*, “Ultra-high-speed Processing of Nanomaterial-reinforced Woven Carbon Fiber/Polyamide 6 Composites Using Reactive Thermoplastic Resin Transfer Molding,” Composites Part B, 143, pp. 36-46, June 15, 2018. [DOI]

[ 67 ] Ankita Hazarika, Biplab Deka, Kyungil Kong, DoYoung Kim, Young-Woo Nam, Jae-Hun Choi, Chun-Gon Kim, Young-Bin Park, and Hyung Wook Park*, “Microwave Absorption and Mechanical Performance of alpha-MnO2 Nanostructures Grown on Woven Kevlar Fiber/Reduced Graphene Oxide-Polyaniline Nanofiber Array-reinforced Polyester Resin Composites,” Composites Part B, 140, pp. 123-132, May 2018. [DOI]

[ 66 ] Dae Han Sung, Myungsoo Kim*, Young-Bin Park*, “Prediction of Thermal Conductivities of Carbon-containing Fiber-reinforced and Multiscale Hybrid Composites,” Composites Part B, 133, pp. 232-239, January 2018. [DOI]

 

 2017


[ 65 ] Ankita Hazarika, Biplab Deka, DoYoung Kim, Hyung Doh Roh, Young-Bin Park, and Hyung Wook Park*, “Fabrication and Synthesis of Highly Ordered Nickel Cobalt Sulfide Nanowire-grown Woven Kevlar? Fiber/Reduced Graphene Oxide/Polyester Composites,” ACS Applied Materials & Interfaces, 9(41), pp. 36311-36319, September 27, 2017. [DOI]

[ 64 ] Mukesh Sharma, Biraj Das, Mitu Sharma, Biplab K. Deka, Young-Bin Park, Suresh Bhargava, and Kusum K. Bania*, “Pd/Cu-Oxide Nanoconjugate at Zeolite-Y Crystallite Crafting the Mesoporous Channels for Selective Oxidation of Benzyl-Alcohols,” ACS Applied Materials and Interfaces, 9(40), 35453-35462, September 21, 2017. [DOI]

[ 63 ] Mukesh Sharma, Biraj Das, Jugal Charan Sarmah, Anil Hazarika, Biplab K. Deka, Young-Bin Park, and Kusum K. Bania, “Fractal to Monolayer Growth of AgCl and Ag/AgCl Nanoparticles on Vanadium Oxides (VOx) for Visible-light Photocatalysis,” Journal of Materials Chemistry A, July 21, 2017. [DOI]

[ 62 ] Biplab Deka, Ankita Hazarika, Jisoo Kim, Young-Bin Park, and Hyung Wook Park*, “Multifunctional Enhancement of Woven Carbon Fiber/ZnO Nanotube-based Structural Supercapacitor and Polyester Resin-domain Solid-polymer Electrolytes,” Chemical Engineering Journal, 325, pp. 672-680, October 1, 2017. [DOI]

[ 61 ] Ju Youn Kwon, Hyung Wook Park, Young-Bin Park, and Namhun Kim*, “Potentials of Additive Manufacturing with Smart Materials for Chemical Biomarkers in Wearable Applications,” International Journal of Precision Engineering and Manufacturing ? Green Technology, 4(3), pp. 335-347, July 1, 2017. [DOI]

[ 60 ] Minho Seong, Changyoon Jeong, Hoon Yi, Hyun-Ha Park, Won-Gyu Bae, Young-Bin Park, and Hoon Eui Jeong*, “Adhesion of Bioinspired Nanocomposite Microstructure at High Temperatures,” Applied Surface Science, 413, pp. 275-283, August 15, 2017. [DOI]

[ 59 ] Biplab Deka, Ankita Hazarika, Jisoo Kim, Young-Bin Park, and Hyung Wook Park*, “Recent Development and Challenges of Multifunctional Structural Supercapacitors for Automotive Industries,” International Journal of Energy Research, January 17, 2017. [DOI]

[ 58 ] Ankita Hazarika, Biplab Deka, DoYoung Kim, Kyungil Kong, Young-Bin Park, and Hyung Wook Park*, “Microwave-synthesized Freestanding Iron-carbon Nanotubes on Polyester Composites of Woven Kevlar Fibre and Silver Nanoparticle-decorated Graphene,” Scientific Reports, 7, 40386, January 11, 2017. [DOI]

 

 2016


[ 57 ] Joel Renaud Ngouanom Gnidakouong, Hyung Doh Roh, Joo-Hyung Kim*, and Young-Bin Park*, “In Situ Assessment of Carbon Nanotube Flow and Filtration Monitoring through Glass Fabric Using Electrical Resistance Measurement,” Composites Part A, 90, pp. 137-146, July 1, 2016. [DOI]

[ 56 ] Hyung Doh Roh, Homin Lee, and Young-Bin Park*, “Structural Health Monitoring of Carbon-based Materials and Structures Using Electrical Resistance Measurement,” International Journal of Precision Engineering and Manufacturing ? Green Technology, 3(3), pp. 311-321, 2016. [DOI]

[ 55 ] Sang-Ha Hwang, Byeong-Joo Kim, Jong-Beom Baek, Hyeon Suk Shin, Il-Joon Bae, Seong-Young Lee, and Young-Bin Park*, “Effects of Process Parameters and Surface Treatments of Graphene Nanoplatelets on the Crystallinity and Thermomechanical Properties of Polyamide 6 Composite Fibers,” Composites Part B, 100, pp. 220-227, 2016. [DOI]

[ 54 ] Biplab Deka, Ankita Hazarika, Jisoo Kim, Young-Bin Park, and Hyung Wook Park*, “Multifunctional CuO Nanowire Embodied Structural Supercapacitor Based on Woven Carbon Fiber/Ionic Liquid-Polyester Resin,” Composites Part A, 87, pp. 256-262, 2016. [DOI]

[ 53 ] Ravi Kumar Cheedarala, Young-Bin Park*, and Hyung Wook Park*, “Experimental Study on Critical Heat Flux of Highly Efficient Soft Hydrophilic CuO-Chitosan Nanofluid Templates,” International Journal of Heat and Mass Transfer, 100, pp. 396-406, 2016. [DOI]

[ 52 ] Ankita Hazarika, Biplab K. Deka, Doyoung Kim, Young-Bin Park, and Hyung Wook Park* “Microwave-Induced Hierarchical Iron-Carbon Nanotube Nanostructures Anchored on Polypyrrole/Graphene Oxide-Grafted Woven Kevlar Fiber,” Composites Science and Technology, 129, pp. 137-145, 2016. [DOI]

[ 51 ] Kyungil Kong, Ravi Kumar Cheedarala, Myungsoo Kim, Hyung Doh Roh, Young-Bin Park, and Hyung Wook Park*, “Electrical Thermal Heating and Piezoresistive Characteristics of Hybrid CuO-woven Carbon Fiber/Vinyl Ester Composite Laminates,” Composites Part A, 85, pp. 103-112, 2016. [DOI]

[ 50 ] Dae Han Sung, Gu-Hyeok Kang, Kyungil Kong, Myungsoo Kim*, Hyung Wook Park, and Young-Bin Park*, “Characterization of Thermoelectric Properties of Multifunctional Multiscale Composites and Fiber-reinforced Composites for Thermal Energy Harvesting,” Composites Part B, 92, pp. 202-209, 2016. (IF=2.143, Top 10%) [DOI]

[ 49 ] Joel Renaud Ngouanom Gnidakouong, Hyung Doh Roh, Joo-Hyung Kim*, and Young-Bin Park*, “In Situ Process Monitoring of Hierarchical Micro-/nano-composites Using Percolated Carbon Nanotube Networks,” Composites Part A, 84, pp. 281-291, 2016. (IF=2.695, Top 10%) [DOI]

[ 48 ] Myungsoo Kim, Dae Han Sung, Kyungil Kong, Nari Kim, Byeong-Joo Kim, Hyung Wook Park*, Young-Bin Park*, Mooyoung Jung, Sang Hwan Lee, and Su Gi Kim, “Characterization of Resistive Heating and Thermoelectric Behavior of Discontinuous Carbon Fiber-Epoxy Composites,” Composites Part B, 90, pp. 37-44, April, 2016. (IF=2.143, Top 10%) [DOI]

[ 47 ] Biplab K. Deka, Ankita Hazarika, Kyungil Kong, DoYoung Kim, Young-Bin Park, and Hyung Wook Park*, “Interfacial Resistive Heating and Mechanical Properties of Graphene Oxide Assisted CuO Nanoparticles in Woven Carbon Fiber/Polyester Composite,” Composites Part A, 80, pp. 159-170, January, 2016. (IF=2.695, Top 10%) [DOI]

 

 ~2015


[ 46 ] Ankita Hazarika, Biplab K. Deka, Doyoung Kim, Kyungil Kong, Young-Bin Park*, and Hyung Wook Park*, “Growth of Aligned ZnO Nanorods on Woven Kevlar Fiber and Its Performance in Woven Kevlar Fiber/Polyester Composites,” Composites Part A, 78, pp. 284-293, November, 2015. (IF=2.695, Top 10%) [DOI]

[ 45 ] Kyungil Kong, Biplab K. Deka, Jisoo Kim, Young-Bin Park*, and Hyung Wook Park*, “Effect of CuO Nanostructure Morphology on the Mechanical Properties of CuO/Woven Carbon Fiber/Vinyl Ester Composites,” Composites Part A, 78, pp. 48-59, November, 2015. (IF=2.695, Top 10%) [DOI]

[ 44 ] Ravi Kumar Cheedarala, Eun Ju Park, Young-Bin Park*, and Hyung Wook Park*, “Highly Wettable CuO:Graphene Oxide Core?Shell Porous Nanocomposites for Enhanced Critical Heat Flux,” Physica Status Solidi A, March 6, 2015. (IF=1.525, Q2) [DOI]

[ 43 ] Gautam Das, Biplab K. Deka, Seok Hee Lee, Young-Bin Park, and Young Soo Yoon, “Poly(vinyl alcohol)/Silica Nanoparticles Based Anion-Conducting Nanocomposite Membrane For Fuel-Cell Applications,” Macromolecular Research, March 5, 2015. (IF=1.682, Q2) [DOI]

[ 42 ] Byeong-Joo Kim, Biplab K. Deka, Hye Gyu Kim, Myungsoo Kim, Hyung Wok Park, Young-Bin Park*, Aeri Oh, HeeJune Kim, and Il-Joon Bae, “Evaluation of Tool Life in the Dry Machining of Inconel 718 Parts from Additive Manufacturing (AM),” SAMPE Journal, 51(2), pp. 25-31, March 1, 2015. (IF=0.267, Q4) [DOI]

[ 41 ] Hae Deuk Jeong, Jong Hyeok Lee, Byung Gap Lee, Hee Jin Jeong, Geon-Woong Lee, Dae Suk Bang, Donghwan Cho, Young-Bin Park, and Kwang Hwan Jhee, “Effect of Few-Walled Carbon Nanotube Crystallinity on Electron Field Emission Property,” Carbon Letters, 12(4), pp. 207-217, December 31, 2011 (SCIE). [DOI]

[ 40 ] Biplab K. Deka, Kyungil Kong, Jaewoo Seo, DoYoung Kim, Young-Bin Park*, and Hyung Wook Park*, “Controlled Growth of CuO Nanowires on Woven Carbon Fibers and Effects on the Mechanical Properties of Woven Carbon Fiber/Polyester Composites,” Composites Part A, 69, pp. 56-63, February 2015.. (IF=2.695, Top 10%) [DOI]

[ 39 ] Biplab K. Deka, Kyungil Kong, Young-Bin Park*, and Hyung Wook Park*, “Large Pulsed Electron Beam (LPEB)-Processed Woven Carbon Fiber/ZnO Nanorod/Polyester Resin Composites,” Composites Science and Technology, 102, pp. 106-112, October 6, 2014. (IF=3.144, Top 10%) [DOI]

[ 38 ] Chang Soo Lee, Kwan Han Yoon*, Jae Cheol Park, Hong-Un Kim, and Young-Bin Park, “Thermal and Mechanical Properties of Modified CaCO3 Filled Poly (ethylene terephthalate) Nanocomposites,” Fibers and Polymer, 15(7), pp. 1493-1499, 2014. (IF=0.912, Q2, SCIE) [DOI]

[ 37 ] Kyungil Kong, Biplab K. Deka, Myungsoo Kim, Aero Oh, Heejune Kim, Young-Bin Park*, and Hyung Wook Park*, “Interlaminar Resistive Heating Behavior of Woven Carbon Fiber Composite Laminates Modified with ZnO Nanorods,” Composites Science and Technology, 100, pp. 84-91, August, 2014. (IF=3.144, Top 10%) [DOI]

[ 36 ] Sang-Ha Hwang, Dongwoo Kang, Rodney S. Ruoff, Hyeon Suk Shin*, and Young-Bin Park*, “Polyvinyl Alcohol Reinforced and Toughened with Poly(dopamine)-treated Graphene Oxide and Its Application for Humidity Sensing,” ACS Nano, 8(7), pp. 6739-6747, July 22, 2014. (IF=12.062, Top 10%) [DOI]

[ 35 ] Myungsoo Kim, Sang-Ha Hwang, ByeongJoo Kim, Hyung Wook Park*, Jong-Beom Baek, Hyeon Suk Shin, Young-Bin Park*, Il-Joon Bae, Seong-Young Lee, “Modeling, Processing, and Characterization of Exfoliated Graphite Nanoplatelet-Nylon 6 Composite Fibers,” Composites Part B, 66, pp. 511-517, June 24, 2014. (IF=2.143, Top 10%) [DOI]

[ 34 ] Sang-Ha Hwang, Hyo-Jin Ahn, Jong-Chul Yoon, Ji-Hyun Jang*, and Young-Bin Park*, “Transparent Graphene Films with Tunable Piezoresistive Response,” Journal of Materials Chemistry C, 1, pp. 7208-7214, September 5, 2013. [DOI]

[ 33 ] Kyungil Kong, Biplab K. Deka, Sang Kyu Kwak, Young-Bin Park*, Aeri Oh, HeeJune Kim, and Hyung Wook Park*, “Processing and Mechanical Characterization of ZnO/Polyester Woven Carbon-Fiber Composites with Different ZnO Concentrations,” Composites Part A, 55, pp. 152-160, September 5, 2013. (IF=2.695, Top 10%) [DOI]

[ 32 ] Sang-Ha Hwang, Hyung Wook Park*, Young-Bin Park*, Moon-Kwang Um, Joon-Hyung Byun and Soonjo Kwon, “Electromechanical Strain Sensing Using Polycarbonate-Impregnated Carbon Nanotube-Graphene Nanoplatelet Hybrid Composite Sheets,” Composites Science and Technology, 89, pp. 1-9, September 23, 2013. (IF=3.144, Top 10%) [DOI]

[ 31 ] Joel Gnidakouong, Myungsoo Kim, Hyung Wook Park*, Young-Bin Park*, Ho Soon Jeong, Young Bok Jung, Sung Kyu Ahn, Kyungsik Han, and Joung-Man Park, “Electromagnetic Interference Shielding of Composites Consisting of a Polyester Matrix and Carbon Nanotube-Coated Fiber Reinforcement,” Composites Part A, 50, pp. 73-80, April 18, 2013. (IF=2.695, Top 10%) [DOI]

[ 30 ] Sang-Ha Hwang, Hyung Wook Park, and Young-Bin Park*, “Piezoresistive Behavior and Multi-directional Strain Sensing Ability of Carbon Nanotube-Graphene Nanoplatelet Hybrid Sheets,” Smart Materials and Structures, 22, 015013, December 10, 2012. (IF=2.089, Q1) Selected as a Featured Article [DOI]

[ 29 ] Myungsoo Kim, Okenwa Okoli, David Jack, Young-Bin Park, and Zhiyong Liang, “Predicting the Mechanical Properties of Multiscale Composites,” Plastics, Rubber and Composites: Macromolecular Engineering, 42(8), pp. 349-360, October 10, 2013. (IF=0.597, Q3) [DOI]

[ 28 ] Myungsoo Kim, Okenwa Okoli, David Jack, and Young-Bin Park, “Manufacturing Process Improvement and Mechanical Modeling of Multi-walled Carbon Nanotube/Epoxy Composites,” Plastics, Rubber and Composites: Macromolecular Engineering, 42(5), pp. 210-218, May 15, 2013. (IF=0. 597, Q3) [DOI]

[ 27 ] Myungsoo Kim, Gu-Hyeok Kang, Hyung Wook Park, Young-Bin Park*, Yeon Ho Park, and Kwan Han Yoon*, “Design, Manufacturing and Characterization of High-Performance Lightweight Bipolar Plates Based on Carbon Nanotube-Exfoliated Graphite Nanoplatelet Hybrid Nanocomposites,” Journal of Nanomaterials, Article ID 159737, 2012. (IF=1.376, Q2) [DOI]

[ 26 ] Eun Ju Park, Sung Dae Park, In Cheol Bang, Young-Bin Park, and Hyung Wook Park, “Critical heat flux characteristics of nanofluids based on exfoliated graphite nanoplatelets (xGnPs),” Materials Letters, 81, pp. 193-197, April 27, 2012. (IF=2.307, Q1) [DOI]

[ 25 ] Hyung Wook Park, Young-Bin Park, and Steven Y. Liang, “Non-Contact Measurement Methods for Micro- and Meso-Scale Tool Positioning,” International Journal of Advanced Manufacturing Technology, 60, pp. 251-260, August 30, 2011. (IF=1.103, Q2) [DOI]

[ 24 ] Myungsoo Kim, Okenwa Okoli, David Jack, Young-Bin Park, and Zhiyong Liang, “Characterization and Modeling of CNT-Epoxy and CNT-Fiber-Epoxy Composites,” Plastics, Rubber and Composites: Macromolecular Engineering, 40(10), pp. 481-490, December 14, 2011. (IF=0. 597, Q3) [DOI]

[ 23 ] Hyung Wook Park, Young-Bin Park, and Steven Y. Liang, “Multi-Procedure Design Optimization and Analysis of Mesoscale Machine Tools,” International Journal of Advanced Manufacturing Technology, 56, pp. 1-12, January 20, 2011. (IF=1.103, Q2) [DOI]

[ 22 ] Jin Gyu Park, Nam Gyun Yun, Young-Bin Park, Richard Liang, Lloyd Lumata, James S. Brooks, Chuck Zhang, and Ben Wang, “Single-Walled Carbon Nanotube Buckypaper and Mesophase Pitch Carbon/Carbon Composites,” Carbon, 48, pp. 4276-4282, October 5, 2010. (IF=5.378, Top 10%) [DOI]

[ 21 ] Sang-Ha Hwang, Dae-Suk Bang, Kwan Han Yoon, Young-Bin Park, Dae-Yeol Lee, and Sung-Sil Jeong, “Fabrication and Characterization of Aluminum-CNT Powders and Polycarbonate/Aluminum-CNT Nanocomposites,” Journal of Composite Materials, 44, pp. 2711-2722, November 1, 2010. (IF=1.068, Q2) [DOI]

[ 20 ] Chang Heon Kang, Kwan Han Yoon, Dae Suk Bang, and Young-Bin Park, “Properties of Polypropylene Composites Containing Aluminum/Multi-walled Carbon Nanotubes,” Composites Part A, 41, pp. 919-926, July 1, 2010. (IF=2.695, Top 10%) [DOI]

[ 19 ] Carlos Puentes, Okenwa I. Okoli, and Young-Bin Park, “Determination of Effects of Production Parameters on the Viability of Polycarbonate Films for Achieving In-Mold Decoration in Resin Infused Composite Components,” Composites Part A, 40, pp. 368-375, April 2009. (IF=2.695, Top 10%) [DOI]

[ 18 ] Dong Hyun Park, Kwan Han Yoon, Young-Bin Park, Young Sil Lee, Young Jun Lee, and Sang Wan Kim, “Electrical Resistivity of Polycarbonate/Multi-Walled Carbon Nanotube Composites under Varying Injection Molding Conditions,” Journal of Applied Polymer Science, 113(1), pp. 450-455, July 5, 2009. (IF=1.289, Q3) [DOI]

[ 17 ] Myungsoo Kim, Young-Bin Park*, Okenwa Okoli, and Chuck Zhang, “Processing, Characterization, and Modeling of Carbon Nanotube-Reinforced Multiscale Composites,” Composites Science and Technology, 69, pp. 335-342, February 5, 2009. (IF=3.144, Top 10%) [DOI]

[ 16 ] Sang Hyun Jin, Chang Heon Kang, Kwan Han Yoon, Dae Suk Bang, and Young-Bin Park, “Effect of Compatibilizer on Morphology, Thermal, and Rheological Properties of Polypropylene/Functionalized Multi-Walled Carbon Nanotubes Composite,” Journal of Applied Polymer Science, 111(2), pp. 1028-1033, January 15, 2009. (IF=1.289, Q3) [DOI]

[ 15 ] Emily Bowen, Forrest Purser, Soonjo Kwon, Young-Bin Park, and Joon Sang Lee, “Alternative Estimation of Human Exposure of Single-Walled Carbon Nanotubes Using 3-Dimensional Tissue-Engineered Human Lung,” International Journal of Toxicology, 27(6), pp. 441-448, 2008. (IF=1.282, Q3) [DOI]

[ 14 ] Yi Wan, Dave (Dae-Wook) Kim, Young-Bin Park, and Sung Kwan Joo, “Micro Electro Discharge Machining of Polymethylmethacrylate (PMMA)/Multi-Walled Carbon Nanotube (MWCNT) Nanocomposites,” Advanced Composites Letters, 17(4), pp. 115-123, 2008. (IF=0.432, Q4) [DOI]

[ 13 ] Jaehwan Kim, Chen Yi, Kwang-Sun Kang, Young-Bin Park, and Justin Schwartz, “Magnetic Field Effect for Cellulose Nanofiber Alignment,” Journal of Applied Physics, 104(9), 096104, November 1, 2008. (IF=2.168, Q2) [DOI]

[ 12 ] Giang T. Pham, Young-Bin Park*, Shiren Wang, Zhiyong Liang, Ben Wang, Chuck Zhang, Percy Funchess, and Leslie Kramer, “Mechanical and Electrical Properties of Polycarbonate Nanotube Buckypaper Composite Sheets,” Nanotechnology, 19, 325705, July 4, 2008. (IF=3.979, Q1) [DOI]

[ 11 ] Sang Hyun Jin, Kwan Han Yoon, Young-Bin Park, and Dae Suk Bang, “Properties of Surface Modified Multi-Walled Carbon Nanotube-Filled PET Composite Film,” Journal of Applied Polymer Science, 107(2), pp. 1163-1168, January 15, 2008. (IF=1.289, Q3) [DOI]

[ 10 ] Jang Kyung Kim, Kwan Han Yoon, Young-Bin Park, Hong-Un Kim and Yun-Hyuk Bang, “Morphology and Rheological Behaviors of Poly(ethylene terephthalate) Nanocomposites Containing Polyhedral Oligomeric Silsesquioxanes,” Journal of Applied Polymer Science, 107(1), pp. 272-279, January 5, 2008. (IF=1.289, Q3) [DOI]

[ 9 ] Young-Bin Park*, Youngmin Lee, JeongMin Lee, Jina Kang, and Ben Wang, “The Effects of 3D-Simulation-Based Instruction on Students’ Achievement and Interests in a Manufacturing Engineering Class,” International Journal of Engineering Education, 24(4), pp. 843-849, 2008. (IF=0.418, Q3) [DOI]

[ 8 ] Giang T. Pham, Young-Bin Park*, Zhiyong Liang, Chuck Zhang, and Ben Wang, “Processing and Modeling of Conductive Thermoplastic/Carbon Nanotube Films,” Composites Part B, 39(1), pp. 209-216, January 2008. (IF=1.731, Top 10%) [DOI]

[ 7 ] Sang Hyun Jin, Young-Bin Park, and Kwan Han Yoon, “Rheological and Mechanical Properties of Surface Modified Multi-Walled Carbon Nanotube-Filled PET Composite,” Composites Science and Technology, 67(15-16), pp. 3434-3441, December 2007. (IF=3.144, Top 10%) [DOI]

[ 6 ] Shiren Wang, Zhiyong Liang, Giang T. Pham, Young-Bin Park, Ben Wang, Chuck Zhang, Percy Funchess, and Leslie Kramer, “Controlled Nanostructure and High Loading of Single-Walled Carbon Nanotubes Reinforced Polycarbonate Composites,” Nanotechnology, 18(9), 095708, March 7, 2007. (IF=3.979, Q1) [DOI]

[ 5 ] Young-Bin Park and Jonathan S. Colton, “Fatigue of Reinforced Polyurethane Dies in Sheet Metal Forming,” International Journal of Fatigue, 28, pp. 43-52, January 2006. (IF=1.546, Q1) [DOI]

[ 4 ] Young-Bin Park and Jonathan S. Colton, “Failure Analysis of Rapid Prototyped Tooling in Sheet Metal Forming ? Cylindrical Cup Drawing,” ASME Journal of Manufacturing Science and Engineering, 127, pp. 126-137, 2005. (IF=0.727, Q3) [DOI]

[ 3 ] Young-Bin Park and Jonathan S. Colton, “Failure Analysis of Rapid Prototyped Tooling in Sheet Metal Forming ? V-Die Bending,” ASME Journal of Manufacturing Science and Engineering, 127, pp. 116-125, 2005. (IF=0.727, Q3) [DOI]

[ 2 ] Young-Bin Park and Jonathan S. Colton, “Sheet Metal Forming Using Polymer Composite Rapid Prototyped Tooling,” ASME Journal of Engineering Materials and Technology, 125, pp. 247-255, 2003. (IF=0.954, Q2) [DOI]

[ 1 ] Young-Bin Park, Tae-Yong Kim, Joongwon Woo, Dongwon Shin, and Jongwon Kim, “Sliding Mode Cutting Force Regulator for Turning Processes,” International Journal of Machine Tools and Manufacture, 38, pp. 911-930, 1998. (IF=2.169, Top 10%) [DOI]