International

2024


[ 147 ] So Young Oh, Dahun Lee, and Young-Bin Park*, “Real-time Structural Health Monitoring of Carbon-fiber-reinforced Pipes with Clustering Techniques using Electromechanical Behavior,” International Journal of Mechanical Sciences, November 1, 2024. [DOI]

[ 146 ] Seonghwan Lee, Young-Bin Park*, “Self-powered triboelectric sensor based on a carbon fiber/glass fiber/epoxy structural composite for efficient traffic monitoring,” Nano Energy, 128, 109818, May 31, 2024.[DOI]

[ 145 ] Salma A Khanam, Kangkan Sarmah, Ankur Kanti Guha, Seonghwan Lee, Young-Bin Park, Lakshi Saikia, Sayanika Saikia, Rafikul Ali Saha, Kusum K Bania*, “Oxidizing Methanol at Cubic-Hexagonal Junction of NiO-ZnO at Low Onset Potential,” Electrochimica Acta, 498, June 29, 2024.[DOI]

[ 144 ] So Young Oh, Chanwoo Joung, Seonghwan Lee, Yoon-Bo Shim , Dahun Lee, Gyu-Eun Cho, Juhyeong Jang, In Yong Lee*, and Young-Bin Park*, “Condition-based maintenance of wind turbine structures: A state-of-the-art review”, Renewable and Sustainable Energy Reviews, October, 2024. [DOI]

[ 143 ] Gu-Hyeok Kang, Juhyeong Jang, Gyueun Cho, In Yong Lee, Young-Bin Park*, “Real-time structural health monitoring of carbon fiber-reinforced plastic sandwich structures with carbon nanotube-dispersed core using electromechanical behavior data”, Polymer Testing, 136, 108471, July 2024[DOI]

[ 142 ] Gu-Hyeok Kang, Myungsoo Kim, Young-Bin Park*, “Enhanced thermal properties of tensile-aligned chopped carbon Fiber/HDPE composites for one-directional thermal ventilation”, Polymer Testing, 135 (108445), June 1, 2024.[DOI]

[ 141 ] Yoon-Bo Shim, Young-Bin Park*, “Development of Single-stream Resin Transfer Molding using in-situ Anionic Polymerization of ε-Caprolactam with Preprocessing on Carbon Fibers,” Polymer Composites, Accepted, 2024.[DOI]

[ 140 ] Yoon-Bo Shim, In Yong Lee, Young-Bin Park*, “Predicting the material behavior of recycled composites: Experimental analysis and deep learning hybrid approach,” Composites Science and Technology, 249, 110464, April 12, 2024.[DOI]

[ 139 ] Sayanika Saikia, Lakshi Saikia, Seonghwan Lee, Young-Bin Park, Rafikul Ali Saha, Salma A. Khanam, Magdi E.A. Zaki, Kusum K. Bania*, “Cu(I/II)-Co(II/III) photocatalyst with intrinsic electron transport centre for photoreduction of chromium(VI) and photodegradation of methyl violet,” Journal of Environmental Chemical Engineering, April 2024.[DOI]

[ 138 ] Arpita Devi, Mrinmoy Manash Bharali, Seonghwan Lee, Young-Bin Park, Lakshi Saikia, Rafikul Ali Saha,Tanmoy Kalita, Dhruba Jyoti Kalita,Subir Biswas,Tonmoy Jyoti Bora, Salma Akhtara Khanam  and  Kusum K. Bania *, “Photoactivation of Peroxymonosulfate (PMS) over CuO-ZnO p-n heterojunction for selective C2 trimerization of indoles,” Catalysis Science & Technology, March 11, 2024.[DOI]

 

2023


[ 137 ] Salma A. Khanam, Sayanika Saikia, Seonghwan Lee, Young-Bin Park, Magdi E. A. Zaki and Kusum K. Bania*, “Interfacial Effect-Induced Electrocatalytic Activity of Spinel Cobalt Oxide in Methanol Oxidation Reaction”, ACS Omega, November 28, 2023. [DOI]

[ 136 ] Gautam Gogoi, Nand K. Gaur, Seonghwan Lee, Young-Bin Park, Lakshi Saikia, Magdi E.A. Zaki, Kusum K. Bania*, “Copper oxide in layered tin oxide with intracrystalline microporosity for oxidative imination of toluene and p-xylene,” Molecular Catalysis, November, 2023. [DOI]

[ 135 ] Sayanika Saikia, Manoshi Saikia, Salma A. Khanam, Seonghwan Lee, Young-Bin Park, Lakshi Saikia, Gautam Gogoi and  Kusum K. Bania*, “Cobalt oxide decked with inorganic-sulfur containing vanadium oxide for chromium(vi) reduction and UV-light-assisted methyl orange degradation,” Materials Advances, October 19, 2023.[DOI]

[ 134 ] Tonmoy J. Bora, Nitumoni Hazarika, Nand K. Gour, Seonghwan Lee, Young-Bin Park, Subir Biswas, Arpita Devi and Kusum K. Bania*, “Low-Palladium-Content Iron(III) Nanocatalyst Supported on Zeolite-NaY for C–Cl Bond Activation,” ACS Applied Nano Materials, September 15, 2023. [DOI]

[ 133 ] Seonghwan Lee, Young-Bin Park*, “Contact–separation mode triboelectric nanogenerator utilizing carbon-fiber composite structure for harvesting mechanical energy,” Functional Composites and Structures, 5, September 18, 2023. [DOI]

[ 132 ] Nazimul Hoque, Seonghwan Lee, Young-Bin Park, Subhasish Roy, Magdi E. A. Zaki, and Kusum K. Bania*, “Ni(OH) 2 -SnO 2 at the Hybrid Interface of Zeolite-Y and rGO for Electrochemical Oxidation of Methanol and Ethanol,” Energy & Fuels, 37, July 13, 2023. [DOI]

[ 131 ] Gu-Hyeok Kang, Myungsoo Kim, Young-Bin Park*, “Improvement of electrical conductivity in glass bubble-carbon nanotube/polyamide 6 hybrid scale composite through novel mechanical forming and segregated network morphology,” Polymer Testing, 108138, July 1, 2023. [DOI]

[ 130 ] Ankita Hazarika, Biplab K. Deka, Hyunmin Park, Yun Jae Hwang, Anand P. Jaiswal, Young-Bin Park, Hyung Wook Park*, “Hierarchically designed 3-D printed porous nylon fabric-based personal thermoregulatory for radiative and directional wick-evaporative cooling,” Chemical Engineering Journal, 471, 144536, June 30, 2023. [DOI]

[ 129 ]  Gu-Hyeok Kang, Yoon-Bo Shim, Myungsoo Kim, Young-Bin Park*, “Thermal conductivity controlled by a segregated network prepared using carbon nanotube/polyamide 6 composite with glass bubbles,” Polymer Composites, June 21, 2023. [DOI]

[ 128 ] In Yong Lee, Hyung Doh Roh, So Young Oh and Young-Bin Park*, “Advanced condition-based self-monitoring of composites damaged area under multiple impacts using Monte Carlo based prognostics,” Polymer testing, 123, 108024, June 1, 2023. [DOI]

[ 127 ] In Yong Lee, Chanwoo Joung, So Young Oh and Young-Bin Park*, “Real-time in-depth damage identification and health index system for carbon fiber- reinforced composites using electromechanical behavior and data processing tools,” Composites Science and Technology, 236, 109951, May 3, 2023. [DOI]

[ 126 ] Arpita Devi, Mrinmoy Manash Bharali, Subir Biswas, Tonmoy J. Bora, Jayanta K. Nath, Seonghwan Lee, Young-Bin Park, Lakshi Saikia, Manash J. Baruah and Kusum K. Bania*, “Utilization of methanol and ethanol for 3,3’-Bis(indolyl)methane synthesis through activation of peroxymonosulfate over copper catalyst,” Green Chemistry, 25, 3443, April 12, 2023. [DOI]

[ 125 ] Manseok Yoon, Gu-Hyeok Kang, “Effect of dynamic friction and static friction in finite element analysis of carbon fiber preform”, Polymer Composites, 44, 4, February 17, 2023. [DOI]

[ 124 ] Biplab K. Deka, Ankita Hazarika, Gu-Hyeok Kang, Yun Jae Hwang, Anand Prakash Jaiswal, Dong Chan Kim, Young-Bin Park, Hyung Wook Park*, “3D-Printed Structural Supercapacitor with MXene-N@Zn-Co Selenide Nanowire Based Woven Carbon Fiber Electrodes,” ACS Energy Letters, 8, 2, January 16, 2023.[DOI]

[ 123 ] Hyung Doh Roh, In Yong Lee, Jungwan Lee, Jung-soo Kim, Young-Bin Park*, Moon-Kwang Um*, “Smart fiber orientation monitoring system in a mold via electrical route modeling”, Materials Today Communications, 2023. [DOI]

 2022


[ 122 ] In Yong Lee, Juhyeong Jang, Young-Bin Park*, “Advanced structural health monitoring in carbon fiber-reinforced plastic using real-time self-sensing data and convolutional neural network architectures”, MATERIALS & DESIGN, 2022. [DOI]

[ 121 ] Hyung Doh Roh, Dahun Lee, In Yong Lee, Young-Bin Park* ,“Machine learning aided design of smart, self-sensing fiber-reinforced plastics”, Composites Part C, 2022. [DOI]

[ 120 ] In Yong LeeHyung Doh Roh, Young-Bin Park*, “Prognostics and health management of composite structures under multiple impacts through electromechanical behavior and a particle filter”, MATERIALS & DESIGN, 2022. [DOI]

[ 119 ] Gu-Hyeok Kang, Chanwoo Joung, Hye-Gyu Kim, Seongwoo Im, Soo-Chang Kang, Wooseok Ji,  Young-Bin Park*, “Manufacturing, thermoforming, and recycling of glass fiber/ PET/ PET foam sandwich composites: DOE analysis of recycled materials”, POLYMER COMPOSITES, 2022. [DOI]

[ 118 ] Salma A. Khanam, Nazimul Hoque, Seonghwan Lee, Young -Bin Park, Gautam Gogoi, Kusum K. Bania, “Tubular Nickel Hydroxide Embedded in Zeolitic Cobalt Oxide for Methanol Oxidation Reaction”, ACS APPLIED ENERGY MATERIALS, 2022. [DOI]

[ 117 ] Nazimul Hoque, Seonghwan Lee, Young-Bin Park, Subhasish Roy, Manash J. Baruah, Subir Biswas, Gautam Gogoi, Tonmoy J. Bora, Rupjyoti Dutta, Kusum K. Bania, “Dual Matrix Influence on Ni(II) Rich Hybrid Catalyst for Electrochemical Methanol Oxidation Reaction”, CHEMNANOMAT, 2022.[DOI]

[ 116 ] Gautam Gogoi, Manash J. Baruah, Subir Biswas, Nazimul Hoque, Seonghwan Lee, Young-Bin Park, Lakshi Saikia, Kusum K. Bania, “CuO-Fe(III)-Zeolite-Y as efficient catalyst for oxidative alcohol-amine coupling reactions”, Molecular Catalysis, 2022.[DOI]

[ 115 ] Ankita Hazarika, Biplab K. Deka, Dong Chan Kim, Anand P. Jaiswal, Jaewoo Seo, Young-Bin Park,  Jisoo Kim, Hyung Wook Park, “Multidimensional wearable self-powered personal thermal management with scalable solar heating and a triboelectric nanogenerator”, Nano Energy, 2022. [DOI]

[ 114 ] Hyung Doh Roh, Young-Bin Park*, “Carbon fiber grid sensor for structural deformation using piezoresistive behavior of carbon fiber”, Sensors and Actuators A: Physical, 2022. [DOI]

[ 113 ] Subir Biswas, Manash J. Baruah, Gautam Gogoi, Nazimul Hoque, Seonghwan Lee, Young-Bin Park, Lakshi Saikia, Kusum K.Bani, “Dehydrogenation of ethanol over CuO-Mg-Y for cross-aldol condensation with aryl aldehydes”, Microporous and Mesoporous Materials, 2022. [DOI]

[ 112 ] In Yong Lee, Hyung Doh Roh, Hyung Wook Park, Young-Bin Park*, “Advanced non-destructive evaluation of impact damage growth in carbon-fiber-reinforced plastic by electromechanical analysis and machine learning clustering”, Composites Science and Technology, 2022. [DOI]

[ 111 ] In Yong Lee, Hyung Doh Roh, Young-Bin Park*, “Prediction method for propagating crack length of carbon-fiber-based composite double cantilever beam using its electromechanical behavior and particle filter,” Composite Structures, 2022. [DOI]

 

 2021


[ 110 ] Biplab K. Deka, Ankita Hazarika, Myung-Jun Kwak, Dong Chan Kim, Anand Prakash Jaiswal, Hae Gu Lee, Jaewoo Seo, Changyoon Jeong, Ji-Hyun Jang, Young-Bin* Park, Hyung Wook Park, “Triboelectric nanogenerator-integrated structural supercapacitor with in situ MXene-dispersed N-doped Zn-Cu selenide nanostructured woven carbon fiber for energy harvesting and storage,” Energy Storage Materials, 2021 [DOI]

[ 109 ] Nazimul Hoque, Manash J. Baruah, Seonghwan Lee, Young-Bin Park*, Rupjyoti Dutta, Subhasish Roy, Kusum K. Bania, “Cu(OH)(2)-Ni(OH)(2) engulfed by zeolite-Y hydroxyl nest and multiwalled carbon nanotube for effective methanol oxidation reaction,” Electrochimica Acta, 2021.[DOI]

[ 108 ] Gautam Gogoi, Pinku Saikia, Manash J. Baruah, Seonghwan Lee, Young-Bin Park*, Rupjyoti Dutta, Kusum K. Bania,” Mixed valent copper oxide nanocatalyst on Zeolite-Y for mechanochemical oxidation, reduction and C-C bond formation reaction,” Microporous and Mesoporous Materials, 2021.[DOI]

[ 107 ] Changyoon Jeong, Sang-Ha Hwang, Byeong-Joo Kim, Han Gi Chae, and Young-Bin Park*, “Multilayered Composites with Modulus Gradient for Enhanced Pressure—Temperature Sensing Performance,” Sensors, 2021.[DOI]

[ 106 ] Hyung Doh Roh, Beom-Gon Cho, In Yong Lee, and Young-Bin Park*, “Multi-scale Hybrid In situ Tow Scale Carbon Fiber Reinforced Thermoplastic Strain Sensor,” Composites Science and Technology, 2021.[DOI]

[ 105 ] Byeong-Joo Kim, Jinsik Kim, Sang-Hyup Cha, Yoon-Bo Shim, Changyoon Jeong, Namhun Kim, and Young-Bin Park*, “Interfacial Enhancements between a Three-Dimensionally Printed Honeycomb-Truss Core and Woven Carbon Fiber/Polyamide-6 Facesheets in Sandwich-Structured Composites,” Composites Part A, 2021. [DOI]

[ 104 ] Beom-Gon Cho, Shalik Ram Joshi, Jong Hun Han, Gun-Ho Kim*, and Young-Bin Park*, “Interphase Strengthening of Carbon Fiber/Polyamide 6 Composites through Mixture of Sizing Agent and Reduced Graphene Oxide Coating,” Composites Part A , 2021. [DOI]

[ 103 ] Ravi Kumar Cheedarala, M. N. Prabhakar, Beom Gon Cho, Young Bin Park, and Jung Il Song*,” Novel 3D-Networked Melamine–Naphthalene–Polyamic Acid Nanofillers Doped in Vinyl Ester Resin for Higher Flame Retardancy,” Materials Advances, 2021. [DOI]

[ 102 ] Hyung Doh Roh, Biplab K. Deka, and Young-Bin Park*, “Multifunctional Composite as a Structural Supercapacitor and Self-sensing Sensor using NiCo2O4 Nanowires and Ionic Liquid,” Composites Science and Technology, 2021. [DOI]

[ 101 ] Hyung Doh Roh, So Young Oh, and Young-Bin Park*, “Self-sensing Impact Damage in and Non-destructive Evaluation of Carbon-fiber Reinforced Polymers using Electrical Resistance and the Corresponding Electrical Route Models,” Sensors and Actuators: A. Physical, 2021. [DOI]

[ 100 ] In Yong Lee, Hyung Doh Roh, and Young-Bin Park*, “Novel Structural Health Monitoring Method for CFRPs Using Electrical Resistance Based Probabilistic Sensing Cloud,” Composites Science and Technology, 2021. [DOI]

[ 99 ] Ankita Hazarika, Biplab K. Deka, Jae Woo Seo, Hoon Eui Jeong, Young-BinPark, and Hyung Wook Park*, “Porous Spongy FexCo1-xP Nanostructure and MXene Iinfused Self-powered Flexible Textile Based Personal Thermoregulatory Device,” Nano Energy, 86, 106042, August 1, 2021. [DOI]

[ 98 ] Dong-Jun Kwon, Neul-Sae-Rom Kim, Yeong-Jin Jang, Seong-Baek Yang, Jeong-Hyun Yeum, Ji-Hoon Jung, Sang-Yong Nam*, Young-Bin Park, Wooseok Ji*, “Investigation of Impact Resistance Performance of Carbon Fiber Reinforced Polypropylene Composites with Different Lamination to Applicate Fender Parts,” Composites Part B, 215, 108767, June 15, 2021. [DOI]

[ 97 ] Beom-Gon Cho, Shalik Ram Joshi, Seongjin Lee, Shin-Kwan Kim, Young-Bin Park*, and Gun-Ho Kim*, “Enhanced Mechanical and Antibacterial Properties of Nanocomposites Based on Poly(vinyl Alcohol) and Biopolymer-derived Reduced Graphene Oxide,” Polymers, 13(4), 615, February 18, 2021. [DOI]

 

 2020


[ 96 ] Ankita Hazarika, Biplab K.Deka, Do Young Kim, Young-BinPark, and Hyung WookPark*, “Smart Gating of the Flexible Ag@CoxMo1-xP and rGO-loaded Composite Based Personal Thermal Management Device Inspired by the Neuroanatomic Circuitry of Endotherms,” Chemical Engineering Journal, 127746, 2020. [DOI]

[ 95 ] Sooyoung Lee, Chaeyoung Hong, Taeseong Choi, Hye-gyu Kim, Seong-Woo Im, Soo-Chang Kang, Young-Bin Park, and Wooseok Ji*, “CSAI Analysis of Non-crimp Fabric Cross-ply Laminate Manufactured through Wet Compression Molding Process,” Composite Structures, 255, 113056, January 1, 2021. [DOI]

[ 94 ] Beom-Gon Cho, Jung-Eun Lee, Sang-Ha Hwang, Jong Hun Han, Han Gi Chae, and Young-Bin Park*, “Enhancement in Mechanical Properties of Polyamide 66-Carbon Fiber Composites Containing Graphene Oxide-Carbon Nanotube Hybrid Nanofillers Synthesized through in situ Interfacial Polymerization,” Composites Part A, 135, 105938, August 1, 2020. [DOI]

[ 93 ] Changyoon Jeong, Hangil Ko, Hyun-Tak Kim, Kahyun Sun, Tae-Hyuk Kwon*, Hoon Eui Jeong*, and Young-Bin Park*, “Bioinspired, High-Sensitivity Mechanical Sensors Realized with Hexagonal Microcolumnar Arrays Coated with Ultrasonic-Sprayed Single-Walled Carbon Nanotubes,” ACS Applied Materials and Interfaces, 12(16), pp. 18813–18822, April 1, 2020. [DOI]

[ 92 ] Beom-Gon Cho, Shalik Ram Joshi, Jaekyo Lee, Young-Bin Park* and Gun-Ho Kim*, “Direct Growth of Thermally Reduced Graphene Oxide on Carbon Fiber for Enhanced Mechanical Strength,” Composites Part B, 193, 108010, July 15, 2020. [DOI]

[ 91 ] Biplab Deka, Ankita Hazarika, Seonghwan Lee, Do-Young Kim, Young-Bin Park, and Hyung Wook Park*, “Triboelectric-nanogenerator-integrated Structural Supercapacitor Based on Highly Active P-doped Branched Cu–Mn Selenide Nanowires for Efficient Energy Harvesting and Storage,” Nano Energy, 73, 104754, July 1, 2020. [DOI]

[ 90 ] Yeong-Tae Jung, Hyung Doh Roh, In Yong Lee, and Young-Bin Park*, “Strain Sensing and Progressive Failure Monitoring of Glass-fiber-reinforced Composites Using Percolated Carbon Nanotube Networks,” Functional Composites and Structures, 2(1), 015006, March 17, 2020. [DOI]

[ 89 ] Byeong-Joo Kim, Biplab Deka, Chanwoo Joung, and Young-Bin Park*, “Synergistic Mechanical Reinforcement of Woven Carbon Fiber/Polypropylene Composites Using Plasma Treatment and Nanoclay,” International Journal of Precision Engineering and Manufacturing-Green Technology, 2020. [DOI]

[ 88 ] Changyoon Jeong, Tae Hee Lee, Seung Man Noh* and Young-Bin Park*, “Real-time In Situ Monitoring of Manufacturing Process and CFRP Quality by Relative Resistance Change Measurement,” Polymer Testing, 85, 106416, February 28, 2020 (published online on February 9, 2020). [DOI]

[ 87 ] Changyoon Jeong and Young-Bin Park*, “Exfoliated Graphite Nanoplatelet-Carbon Nanotube Hybrid Composites for Compression Sensing,” ACS Omega, 5, 6, pp. 2630-2639 (published online on February 3, 2020). [DOI]

[ 86 ] Eunju Park, Dong Min Kim, Hyung Wook Park, Young-Bin Park, and Namhun Kim*, “Evaluation of Tool Life in the Dry Machining of Inconel 718 Parts from Additive Manufacturing (AM)” International Journal of Precision Engineering and Manufacturing, 21(1), pp. 57-65, 2020 (published online on December 31, 2019). [DOI]

[ 85 ] Changyoon Jeong, Seonghwan Lee, Hyung Doh Roh, Maria Q. Feng, and Young-Bin Park*, “Hierarchically Structured ZnO Nanorod-Carbon Fiber Composites as Ultrathin, Flexible, Highly Sensitive Triboelectric Sensors,” Smart Materials and Structures, 29, 025002, 2020 (published online on December 19, 2019). [DOI]

[ 84 ] Changyoon Jeong, Chanwoo Joung, Seonghwan Lee, Maria Q. Feng, and Young‑Bin Park*, “Carbon Nanocomposite Based Mechanical Sensing and Energy Harvesting,” International Journal of Precision Engineering and Manufacturing-Green Technology, 7(1), pp. 247-267, 2020 (published online on October 5, 2019). [DOI]

 

 2019


[ 83 ] Changyoon Jeong, Hangil Ko, Hoon Eui Jeong*, and Young-Bin Park*, “Shear-Pressure Multimodal Sensor Based on Flexible Cylindrical Pillar Array and Flat Structured Carbon Nanocomposites with Simple Fabrication Process,” Composites Science and Technology, 184, 107841, September 30, 2019. [DOI]

[ 82 ] Joel Renaud Ngouanom Gnidakouong, Joo-Hyung Kim, Hansang Kim, Young-Bin Park*, “Electromagnetic Interference Shielding Behavior of Hybrid Carbon Nanotube/Exfoliated Graphite Nanoplatelet Coated Glass Fiber Composites,” Materials Science and Engineering B, 248, 114403, 2019. [DOI]

[ 81 ] Biplab K. Deka, Ankita Hazarika, Jisoo Kim, Hoon Eui Jeong, Young-Bin Park, and Hyung Wook Park*, “Fabrication of the Piezoresistive Sensor Using the Continuous Laser-induced Nanostructure Growth for Structural Health Monitoring,” Carbon, 152, pp. 376-387, June 4, 2019. [DOI]

[ 80 ] Ankita Hazarika, Biplab K. Deka, Changyoon Jeong, Young-Bin Park, and Hyung Wook Park*, “Biomechanical Energy-Harvesting Wearable Textile-Based Personal Thermal Management Device Containing Epitaxially Grown Aligned Ag-Tipped-NixCo1−xSe Nanowires/Reduced Graphene Oxide,” Advanced Functional Materials, 29, 1903144, June 12, 2019. [DOI]

[ 79 ] Hyung Doh Roh, Soo-Young Lee, Eonyeon Jo, Hyegyu Kim, Wooseok Ji*, and Young-Bin Park*, “Deformation and Interlaminar Crack Propagation Sensing in Carbon Fiber Composites Using Electrical Resistance Measurement,” Composite Structures, 216, pp. 142-150, May 1, 2019. [DOI]

[ 78 ] Sehyeok Oh, Inyong Lee, Young-Bin Park, and Hyungson Ki*, “Investigation of Cut Quality in Fiber Laser Cutting of CFRP,” Optics and Laser Technology, 113, pp. 129-140, May 1, 2019. [DOI]

[ 77 ] Beom-Gon Cho, Sang-Ha Hwang, Miseon Park, Jong Kyoo Park, Young-Bin Park*, and Han Gi Chae*, “The Effects of Plasma Surface Treatment on the Mechanical Properties of Polycarbonate/Carbon Nanotube/Carbon Fiber Composites,” Composites Part B, 160, pp. 436-445, March 1, 2019. [DOI]

[ 76 ] Biplab K Deka, Ankita Hazarika, Jisoo Kim, Young-Bin Park, and Hyung Wook Park*, “Bimetallic Copper Cobalt Selenide Nanowire-anchored Woven Carbon Fiber-based Structural Supercapacitors,” Chemical Engineering Journal, 355, pp. 551-559, January 1, 2019. [DOI]

 

 2018


[ 75 ] Byeong-Joo Kim, Sang-Hyup Cha, Gu-Hyeok Kang, Kyungil Kong, Wooseok Ji, Hyung Wook Park, Young-Bin Park*, “Interfacial Control through ZnO Nanorod Growth on Plasma-treated Carbon Fiber for Multiscale Reinforcement of Carbon Fiber/Polyamide 6 Composites,” Materials Today Communications, 17, pp. 438-449, December 1, 2018. [DOI]

[ 74 ] Ankita Hazarika, Biplab Deka, Do-Young Kim, Hoon Eui Jeong, Young-Bin Park, and Hyung Wook Park*, “Woven Kevlar® Fiber/Polydimethylsiloxane/Reduced Graphene Oxide Composite based Personal Thermal Management with Freestanding Cu-Ni Core-shell Nanowires,” Nano Letters 18(11), pp. 6731-6739, October 5, 2018. [DOI]

[ 73 ] Beom-Gon Cho, Seonghwan Lee, Sang-Ha Hwang, Jong Hun Han, Han Gi Chae, and Young-Bin Park*, “Influence of Hybrid Graphene Oxide-Carbon Nanotube as a Nano-filler on the Interfacial Interaction in Nylon Composites Prepared by In Situ Interfacial Polymerization,” Carbon, 140, pp. 324-337, December 2018. [DOI]

[ 72 ] Byeong-Joo Kim, Sang-Hyup Cha, Kyungil Kong, Wooseok Ji, Hyung Wook Park, and Young-Bin Park*, “Synergistic Interfacial Reinforcement of Carbon Fiber/Polyamide 6 Composites Using Carbon-nanotube-modified Silane Coating on ZnO-nanorod-grown Carbon Fiber,” Composites Science and Technology,165, pp. 362-372, September 8, 2018. [DOI]

[ 71 ] Sang-Ha Hwang, Young-Bin Park*, Seung-Hyun Hur*, and Han Gi Chae*, “Pt Nanoparticle-Decorated Reduced Graphene Oxide Hydrogel for High-Performance Strain Sensor: Tailoring Piezoresistive Property by Controlled Microstructure of Hydrogel,” ACS Applied Nano Materials, 1(6), pp. 2836-2843, May 23, 2018. [DOI]

[ 70 ] Biraj Das, Mukesh Sharma, Biplab K. Deka, Ankita Hazarika, Young-Bin Park, Anil Hazarika, Suresh K. Bhargava*, and Kusum K. Bania*, “Facile Synthesis of 1D-Architecture of Silver-Vanadates in Carbon Nest for Enhanced Visible Light Driven Photo-oxidation Process,” Journal of Environmental Chemical Engineering, 6(2), pp. 3167-3176, April 2018. [DOI]

[ 69 ] Byeong-Joo Kim, Biplab Deka, Il-Joon Bae, Dong-Hyuk Choi, Dong-Il Son, and Young-Bin Park*, “Unidirectional Spread-tow Carbon Fiber/Polypropylene Composites Reinforced with Mechanically Aligned Multi-walled Carbon Nanotubes and Exfoliated Graphite Nanoplatelets,” Polymer Composites, 39(S2), pp. E1251-E1261, May 2018. [DOI]

[ 68 ] Byeong-Joo Kim, Sang-Hyup Cha, and Young-Bin Park*, “Ultra-high-speed Processing of Nanomaterial-reinforced Woven Carbon Fiber/Polyamide 6 Composites Using Reactive Thermoplastic Resin Transfer Molding,” Composites Part B, 143, pp. 36-46, June 15, 2018. [DOI]

[ 67 ] Ankita Hazarika, Biplab Deka, Kyungil Kong, DoYoung Kim, Young-Woo Nam, Jae-Hun Choi, Chun-Gon Kim, Young-Bin Park, and Hyung Wook Park*, “Microwave Absorption and Mechanical Performance of alpha-MnO2 Nanostructures Grown on Woven Kevlar Fiber/Reduced Graphene Oxide-Polyaniline Nanofiber Array-reinforced Polyester Resin Composites,” Composites Part B, 140, pp. 123-132, May 2018. [DOI]

[ 66 ] Dae Han Sung, Myungsoo Kim*, Young-Bin Park*, “Prediction of Thermal Conductivities of Carbon-containing Fiber-reinforced and Multiscale Hybrid Composites,” Composites Part B, 133, pp. 232-239, January 2018. [DOI]

 

 2017


[ 65 ] Ankita Hazarika, Biplab Deka, DoYoung Kim, Hyung Doh Roh, Young-Bin Park, and Hyung Wook Park*, “Fabrication and Synthesis of Highly Ordered Nickel Cobalt Sulfide Nanowire-grown Woven Kevlar? Fiber/Reduced Graphene Oxide/Polyester Composites,” ACS Applied Materials & Interfaces, 9(41), pp. 36311-36319, September 27, 2017. [DOI]

[ 64 ] Mukesh Sharma, Biraj Das, Mitu Sharma, Biplab K. Deka, Young-Bin Park, Suresh Bhargava, and Kusum K. Bania*, “Pd/Cu-Oxide Nanoconjugate at Zeolite-Y Crystallite Crafting the Mesoporous Channels for Selective Oxidation of Benzyl-Alcohols,” ACS Applied Materials and Interfaces, 9(40), 35453-35462, September 21, 2017. [DOI]

[ 63 ] Mukesh Sharma, Biraj Das, Jugal Charan Sarmah, Anil Hazarika, Biplab K. Deka, Young-Bin Park, and Kusum K. Bania, “Fractal to Monolayer Growth of AgCl and Ag/AgCl Nanoparticles on Vanadium Oxides (VOx) for Visible-light Photocatalysis,” Journal of Materials Chemistry A, July 21, 2017. [DOI]

[ 62 ] Biplab Deka, Ankita Hazarika, Jisoo Kim, Young-Bin Park, and Hyung Wook Park*, “Multifunctional Enhancement of Woven Carbon Fiber/ZnO Nanotube-based Structural Supercapacitor and Polyester Resin-domain Solid-polymer Electrolytes,” Chemical Engineering Journal, 325, pp. 672-680, October 1, 2017. [DOI]

[ 61 ] Ju Youn Kwon, Hyung Wook Park, Young-Bin Park, and Namhun Kim*, “Potentials of Additive Manufacturing with Smart Materials for Chemical Biomarkers in Wearable Applications,” International Journal of Precision Engineering and Manufacturing ? Green Technology, 4(3), pp. 335-347, July 1, 2017. [DOI]

[ 60 ] Minho Seong, Changyoon Jeong, Hoon Yi, Hyun-Ha Park, Won-Gyu Bae, Young-Bin Park, and Hoon Eui Jeong*, “Adhesion of Bioinspired Nanocomposite Microstructure at High Temperatures,” Applied Surface Science, 413, pp. 275-283, August 15, 2017. [DOI]

[ 59 ] Biplab Deka, Ankita Hazarika, Jisoo Kim, Young-Bin Park, and Hyung Wook Park*, “Recent Development and Challenges of Multifunctional Structural Supercapacitors for Automotive Industries,” International Journal of Energy Research, January 17, 2017. [DOI]

[ 58 ] Ankita Hazarika, Biplab Deka, DoYoung Kim, Kyungil Kong, Young-Bin Park, and Hyung Wook Park*, “Microwave-synthesized Freestanding Iron-carbon Nanotubes on Polyester Composites of Woven Kevlar Fibre and Silver Nanoparticle-decorated Graphene,” Scientific Reports, 7, 40386, January 11, 2017. [DOI]

 

 2016


[ 57 ] Joel Renaud Ngouanom Gnidakouong, Hyung Doh Roh, Joo-Hyung Kim*, and Young-Bin Park*, “In Situ Assessment of Carbon Nanotube Flow and Filtration Monitoring through Glass Fabric Using Electrical Resistance Measurement,” Composites Part A, 90, pp. 137-146, July 1, 2016. [DOI]

[ 56 ] Hyung Doh Roh, Homin Lee, and Young-Bin Park*, “Structural Health Monitoring of Carbon-based Materials and Structures Using Electrical Resistance Measurement,” International Journal of Precision Engineering and Manufacturing ? Green Technology, 3(3), pp. 311-321, 2016. [DOI]

[ 55 ] Sang-Ha Hwang, Byeong-Joo Kim, Jong-Beom Baek, Hyeon Suk Shin, Il-Joon Bae, Seong-Young Lee, and Young-Bin Park*, “Effects of Process Parameters and Surface Treatments of Graphene Nanoplatelets on the Crystallinity and Thermomechanical Properties of Polyamide 6 Composite Fibers,” Composites Part B, 100, pp. 220-227, 2016. [DOI]

[ 54 ] Biplab Deka, Ankita Hazarika, Jisoo Kim, Young-Bin Park, and Hyung Wook Park*, “Multifunctional CuO Nanowire Embodied Structural Supercapacitor Based on Woven Carbon Fiber/Ionic Liquid-Polyester Resin,” Composites Part A, 87, pp. 256-262, 2016. [DOI]

[ 53 ] Ravi Kumar Cheedarala, Young-Bin Park*, and Hyung Wook Park*, “Experimental Study on Critical Heat Flux of Highly Efficient Soft Hydrophilic CuO-Chitosan Nanofluid Templates,” International Journal of Heat and Mass Transfer, 100, pp. 396-406, 2016. [DOI]

[ 52 ] Ankita Hazarika, Biplab K. Deka, Doyoung Kim, Young-Bin Park, and Hyung Wook Park* “Microwave-Induced Hierarchical Iron-Carbon Nanotube Nanostructures Anchored on Polypyrrole/Graphene Oxide-Grafted Woven Kevlar Fiber,” Composites Science and Technology, 129, pp. 137-145, 2016. [DOI]

[ 51 ] Kyungil Kong, Ravi Kumar Cheedarala, Myungsoo Kim, Hyung Doh Roh, Young-Bin Park, and Hyung Wook Park*, “Electrical Thermal Heating and Piezoresistive Characteristics of Hybrid CuO-woven Carbon Fiber/Vinyl Ester Composite Laminates,” Composites Part A, 85, pp. 103-112, 2016. [DOI]

[ 50 ] Dae Han Sung, Gu-Hyeok Kang, Kyungil Kong, Myungsoo Kim*, Hyung Wook Park, and Young-Bin Park*, “Characterization of Thermoelectric Properties of Multifunctional Multiscale Composites and Fiber-reinforced Composites for Thermal Energy Harvesting,” Composites Part B, 92, pp. 202-209, 2016. (IF=2.143, Top 10%) [DOI]

[ 49 ] Joel Renaud Ngouanom Gnidakouong, Hyung Doh Roh, Joo-Hyung Kim*, and Young-Bin Park*, “In Situ Process Monitoring of Hierarchical Micro-/nano-composites Using Percolated Carbon Nanotube Networks,” Composites Part A, 84, pp. 281-291, 2016. (IF=2.695, Top 10%) [DOI]

[ 48 ] Myungsoo Kim, Dae Han Sung, Kyungil Kong, Nari Kim, Byeong-Joo Kim, Hyung Wook Park*, Young-Bin Park*, Mooyoung Jung, Sang Hwan Lee, and Su Gi Kim, “Characterization of Resistive Heating and Thermoelectric Behavior of Discontinuous Carbon Fiber-Epoxy Composites,” Composites Part B, 90, pp. 37-44, April, 2016. (IF=2.143, Top 10%) [DOI]

[ 47 ] Biplab K. Deka, Ankita Hazarika, Kyungil Kong, DoYoung Kim, Young-Bin Park, and Hyung Wook Park*, “Interfacial Resistive Heating and Mechanical Properties of Graphene Oxide Assisted CuO Nanoparticles in Woven Carbon Fiber/Polyester Composite,” Composites Part A, 80, pp. 159-170, January, 2016. (IF=2.695, Top 10%) [DOI]

 

 ~2015


[ 46 ] Ankita Hazarika, Biplab K. Deka, Doyoung Kim, Kyungil Kong, Young-Bin Park*, and Hyung Wook Park*, “Growth of Aligned ZnO Nanorods on Woven Kevlar Fiber and Its Performance in Woven Kevlar Fiber/Polyester Composites,” Composites Part A, 78, pp. 284-293, November, 2015. (IF=2.695, Top 10%) [DOI]

[ 45 ] Kyungil Kong, Biplab K. Deka, Jisoo Kim, Young-Bin Park*, and Hyung Wook Park*, “Effect of CuO Nanostructure Morphology on the Mechanical Properties of CuO/Woven Carbon Fiber/Vinyl Ester Composites,” Composites Part A, 78, pp. 48-59, November, 2015. (IF=2.695, Top 10%) [DOI]

[ 44 ] Ravi Kumar Cheedarala, Eun Ju Park, Young-Bin Park*, and Hyung Wook Park*, “Highly Wettable CuO:Graphene Oxide Core?Shell Porous Nanocomposites for Enhanced Critical Heat Flux,” Physica Status Solidi A, March 6, 2015. (IF=1.525, Q2) [DOI]

[ 43 ] Gautam Das, Biplab K. Deka, Seok Hee Lee, Young-Bin Park, and Young Soo Yoon, “Poly(vinyl alcohol)/Silica Nanoparticles Based Anion-Conducting Nanocomposite Membrane For Fuel-Cell Applications,” Macromolecular Research, March 5, 2015. (IF=1.682, Q2) [DOI]

[ 42 ] Byeong-Joo Kim, Biplab K. Deka, Hye Gyu Kim, Myungsoo Kim, Hyung Wok Park, Young-Bin Park*, Aeri Oh, HeeJune Kim, and Il-Joon Bae, “Evaluation of Tool Life in the Dry Machining of Inconel 718 Parts from Additive Manufacturing (AM),” SAMPE Journal, 51(2), pp. 25-31, March 1, 2015. (IF=0.267, Q4) [DOI]

[ 41 ] Hae Deuk Jeong, Jong Hyeok Lee, Byung Gap Lee, Hee Jin Jeong, Geon-Woong Lee, Dae Suk Bang, Donghwan Cho, Young-Bin Park, and Kwang Hwan Jhee, “Effect of Few-Walled Carbon Nanotube Crystallinity on Electron Field Emission Property,” Carbon Letters, 12(4), pp. 207-217, December 31, 2011 (SCIE). [DOI]

[ 40 ] Biplab K. Deka, Kyungil Kong, Jaewoo Seo, DoYoung Kim, Young-Bin Park*, and Hyung Wook Park*, “Controlled Growth of CuO Nanowires on Woven Carbon Fibers and Effects on the Mechanical Properties of Woven Carbon Fiber/Polyester Composites,” Composites Part A, 69, pp. 56-63, February 2015.. (IF=2.695, Top 10%) [DOI]

[ 39 ] Biplab K. Deka, Kyungil Kong, Young-Bin Park*, and Hyung Wook Park*, “Large Pulsed Electron Beam (LPEB)-Processed Woven Carbon Fiber/ZnO Nanorod/Polyester Resin Composites,” Composites Science and Technology, 102, pp. 106-112, October 6, 2014. (IF=3.144, Top 10%) [DOI]

[ 38 ] Chang Soo Lee, Kwan Han Yoon*, Jae Cheol Park, Hong-Un Kim, and Young-Bin Park, “Thermal and Mechanical Properties of Modified CaCO3 Filled Poly (ethylene terephthalate) Nanocomposites,” Fibers and Polymer, 15(7), pp. 1493-1499, 2014. (IF=0.912, Q2, SCIE) [DOI]

[ 37 ] Kyungil Kong, Biplab K. Deka, Myungsoo Kim, Aero Oh, Heejune Kim, Young-Bin Park*, and Hyung Wook Park*, “Interlaminar Resistive Heating Behavior of Woven Carbon Fiber Composite Laminates Modified with ZnO Nanorods,” Composites Science and Technology, 100, pp. 84-91, August, 2014. (IF=3.144, Top 10%) [DOI]

[ 36 ] Sang-Ha Hwang, Dongwoo Kang, Rodney S. Ruoff, Hyeon Suk Shin*, and Young-Bin Park*, “Polyvinyl Alcohol Reinforced and Toughened with Poly(dopamine)-treated Graphene Oxide and Its Application for Humidity Sensing,” ACS Nano, 8(7), pp. 6739-6747, July 22, 2014. (IF=12.062, Top 10%) [DOI]

[ 35 ] Myungsoo Kim, Sang-Ha Hwang, ByeongJoo Kim, Hyung Wook Park*, Jong-Beom Baek, Hyeon Suk Shin, Young-Bin Park*, Il-Joon Bae, Seong-Young Lee, “Modeling, Processing, and Characterization of Exfoliated Graphite Nanoplatelet-Nylon 6 Composite Fibers,” Composites Part B, 66, pp. 511-517, June 24, 2014. (IF=2.143, Top 10%) [DOI]

[ 34 ] Sang-Ha Hwang, Hyo-Jin Ahn, Jong-Chul Yoon, Ji-Hyun Jang*, and Young-Bin Park*, “Transparent Graphene Films with Tunable Piezoresistive Response,” Journal of Materials Chemistry C, 1, pp. 7208-7214, September 5, 2013. [DOI]

[ 33 ] Kyungil Kong, Biplab K. Deka, Sang Kyu Kwak, Young-Bin Park*, Aeri Oh, HeeJune Kim, and Hyung Wook Park*, “Processing and Mechanical Characterization of ZnO/Polyester Woven Carbon-Fiber Composites with Different ZnO Concentrations,” Composites Part A, 55, pp. 152-160, September 5, 2013. (IF=2.695, Top 10%) [DOI]

[ 32 ] Sang-Ha Hwang, Hyung Wook Park*, Young-Bin Park*, Moon-Kwang Um, Joon-Hyung Byun and Soonjo Kwon, “Electromechanical Strain Sensing Using Polycarbonate-Impregnated Carbon Nanotube-Graphene Nanoplatelet Hybrid Composite Sheets,” Composites Science and Technology, 89, pp. 1-9, September 23, 2013. (IF=3.144, Top 10%) [DOI]

[ 31 ] Joel Gnidakouong, Myungsoo Kim, Hyung Wook Park*, Young-Bin Park*, Ho Soon Jeong, Young Bok Jung, Sung Kyu Ahn, Kyungsik Han, and Joung-Man Park, “Electromagnetic Interference Shielding of Composites Consisting of a Polyester Matrix and Carbon Nanotube-Coated Fiber Reinforcement,” Composites Part A, 50, pp. 73-80, April 18, 2013. (IF=2.695, Top 10%) [DOI]

[ 30 ] Sang-Ha Hwang, Hyung Wook Park, and Young-Bin Park*, “Piezoresistive Behavior and Multi-directional Strain Sensing Ability of Carbon Nanotube-Graphene Nanoplatelet Hybrid Sheets,” Smart Materials and Structures, 22, 015013, December 10, 2012. (IF=2.089, Q1) Selected as a Featured Article [DOI]

[ 29 ] Myungsoo Kim, Okenwa Okoli, David Jack, Young-Bin Park, and Zhiyong Liang, “Predicting the Mechanical Properties of Multiscale Composites,” Plastics, Rubber and Composites: Macromolecular Engineering, 42(8), pp. 349-360, October 10, 2013. (IF=0.597, Q3) [DOI]

[ 28 ] Myungsoo Kim, Okenwa Okoli, David Jack, and Young-Bin Park, “Manufacturing Process Improvement and Mechanical Modeling of Multi-walled Carbon Nanotube/Epoxy Composites,” Plastics, Rubber and Composites: Macromolecular Engineering, 42(5), pp. 210-218, May 15, 2013. (IF=0. 597, Q3) [DOI]

[ 27 ] Myungsoo Kim, Gu-Hyeok Kang, Hyung Wook Park, Young-Bin Park*, Yeon Ho Park, and Kwan Han Yoon*, “Design, Manufacturing and Characterization of High-Performance Lightweight Bipolar Plates Based on Carbon Nanotube-Exfoliated Graphite Nanoplatelet Hybrid Nanocomposites,” Journal of Nanomaterials, Article ID 159737, 2012. (IF=1.376, Q2) [DOI]

[ 26 ] Eun Ju Park, Sung Dae Park, In Cheol Bang, Young-Bin Park, and Hyung Wook Park, “Critical heat flux characteristics of nanofluids based on exfoliated graphite nanoplatelets (xGnPs),” Materials Letters, 81, pp. 193-197, April 27, 2012. (IF=2.307, Q1) [DOI]

[ 25 ] Hyung Wook Park, Young-Bin Park, and Steven Y. Liang, “Non-Contact Measurement Methods for Micro- and Meso-Scale Tool Positioning,” International Journal of Advanced Manufacturing Technology, 60, pp. 251-260, August 30, 2011. (IF=1.103, Q2) [DOI]

[ 24 ] Myungsoo Kim, Okenwa Okoli, David Jack, Young-Bin Park, and Zhiyong Liang, “Characterization and Modeling of CNT-Epoxy and CNT-Fiber-Epoxy Composites,” Plastics, Rubber and Composites: Macromolecular Engineering, 40(10), pp. 481-490, December 14, 2011. (IF=0. 597, Q3) [DOI]

[ 23 ] Hyung Wook Park, Young-Bin Park, and Steven Y. Liang, “Multi-Procedure Design Optimization and Analysis of Mesoscale Machine Tools,” International Journal of Advanced Manufacturing Technology, 56, pp. 1-12, January 20, 2011. (IF=1.103, Q2) [DOI]

[ 22 ] Jin Gyu Park, Nam Gyun Yun, Young-Bin Park, Richard Liang, Lloyd Lumata, James S. Brooks, Chuck Zhang, and Ben Wang, “Single-Walled Carbon Nanotube Buckypaper and Mesophase Pitch Carbon/Carbon Composites,” Carbon, 48, pp. 4276-4282, October 5, 2010. (IF=5.378, Top 10%) [DOI]

[ 21 ] Sang-Ha Hwang, Dae-Suk Bang, Kwan Han Yoon, Young-Bin Park, Dae-Yeol Lee, and Sung-Sil Jeong, “Fabrication and Characterization of Aluminum-CNT Powders and Polycarbonate/Aluminum-CNT Nanocomposites,” Journal of Composite Materials, 44, pp. 2711-2722, November 1, 2010. (IF=1.068, Q2) [DOI]

[ 20 ] Chang Heon Kang, Kwan Han Yoon, Dae Suk Bang, and Young-Bin Park, “Properties of Polypropylene Composites Containing Aluminum/Multi-walled Carbon Nanotubes,” Composites Part A, 41, pp. 919-926, July 1, 2010. (IF=2.695, Top 10%) [DOI]

[ 19 ] Carlos Puentes, Okenwa I. Okoli, and Young-Bin Park, “Determination of Effects of Production Parameters on the Viability of Polycarbonate Films for Achieving In-Mold Decoration in Resin Infused Composite Components,” Composites Part A, 40, pp. 368-375, April 2009. (IF=2.695, Top 10%) [DOI]

[ 18 ] Dong Hyun Park, Kwan Han Yoon, Young-Bin Park, Young Sil Lee, Young Jun Lee, and Sang Wan Kim, “Electrical Resistivity of Polycarbonate/Multi-Walled Carbon Nanotube Composites under Varying Injection Molding Conditions,” Journal of Applied Polymer Science, 113(1), pp. 450-455, July 5, 2009. (IF=1.289, Q3) [DOI]

[ 17 ] Myungsoo Kim, Young-Bin Park*, Okenwa Okoli, and Chuck Zhang, “Processing, Characterization, and Modeling of Carbon Nanotube-Reinforced Multiscale Composites,” Composites Science and Technology, 69, pp. 335-342, February 5, 2009. (IF=3.144, Top 10%) [DOI]

[ 16 ] Sang Hyun Jin, Chang Heon Kang, Kwan Han Yoon, Dae Suk Bang, and Young-Bin Park, “Effect of Compatibilizer on Morphology, Thermal, and Rheological Properties of Polypropylene/Functionalized Multi-Walled Carbon Nanotubes Composite,” Journal of Applied Polymer Science, 111(2), pp. 1028-1033, January 15, 2009. (IF=1.289, Q3) [DOI]

[ 15 ] Emily Bowen, Forrest Purser, Soonjo Kwon, Young-Bin Park, and Joon Sang Lee, “Alternative Estimation of Human Exposure of Single-Walled Carbon Nanotubes Using 3-Dimensional Tissue-Engineered Human Lung,” International Journal of Toxicology, 27(6), pp. 441-448, 2008. (IF=1.282, Q3) [DOI]

[ 14 ] Yi Wan, Dave (Dae-Wook) Kim, Young-Bin Park, and Sung Kwan Joo, “Micro Electro Discharge Machining of Polymethylmethacrylate (PMMA)/Multi-Walled Carbon Nanotube (MWCNT) Nanocomposites,” Advanced Composites Letters, 17(4), pp. 115-123, 2008. (IF=0.432, Q4) [DOI]

[ 13 ] Jaehwan Kim, Chen Yi, Kwang-Sun Kang, Young-Bin Park, and Justin Schwartz, “Magnetic Field Effect for Cellulose Nanofiber Alignment,” Journal of Applied Physics, 104(9), 096104, November 1, 2008. (IF=2.168, Q2) [DOI]

[ 12 ] Giang T. Pham, Young-Bin Park*, Shiren Wang, Zhiyong Liang, Ben Wang, Chuck Zhang, Percy Funchess, and Leslie Kramer, “Mechanical and Electrical Properties of Polycarbonate Nanotube Buckypaper Composite Sheets,” Nanotechnology, 19, 325705, July 4, 2008. (IF=3.979, Q1) [DOI]

[ 11 ] Sang Hyun Jin, Kwan Han Yoon, Young-Bin Park, and Dae Suk Bang, “Properties of Surface Modified Multi-Walled Carbon Nanotube-Filled PET Composite Film,” Journal of Applied Polymer Science, 107(2), pp. 1163-1168, January 15, 2008. (IF=1.289, Q3) [DOI]

[ 10 ] Jang Kyung Kim, Kwan Han Yoon, Young-Bin Park, Hong-Un Kim and Yun-Hyuk Bang, “Morphology and Rheological Behaviors of Poly(ethylene terephthalate) Nanocomposites Containing Polyhedral Oligomeric Silsesquioxanes,” Journal of Applied Polymer Science, 107(1), pp. 272-279, January 5, 2008. (IF=1.289, Q3) [DOI]

[ 9 ] Young-Bin Park*, Youngmin Lee, JeongMin Lee, Jina Kang, and Ben Wang, “The Effects of 3D-Simulation-Based Instruction on Students’ Achievement and Interests in a Manufacturing Engineering Class,” International Journal of Engineering Education, 24(4), pp. 843-849, 2008. (IF=0.418, Q3) [DOI]

[ 8 ] Giang T. Pham, Young-Bin Park*, Zhiyong Liang, Chuck Zhang, and Ben Wang, “Processing and Modeling of Conductive Thermoplastic/Carbon Nanotube Films,” Composites Part B, 39(1), pp. 209-216, January 2008. (IF=1.731, Top 10%) [DOI]

[ 7 ] Sang Hyun Jin, Young-Bin Park, and Kwan Han Yoon, “Rheological and Mechanical Properties of Surface Modified Multi-Walled Carbon Nanotube-Filled PET Composite,” Composites Science and Technology, 67(15-16), pp. 3434-3441, December 2007. (IF=3.144, Top 10%) [DOI]

[ 6 ] Shiren Wang, Zhiyong Liang, Giang T. Pham, Young-Bin Park, Ben Wang, Chuck Zhang, Percy Funchess, and Leslie Kramer, “Controlled Nanostructure and High Loading of Single-Walled Carbon Nanotubes Reinforced Polycarbonate Composites,” Nanotechnology, 18(9), 095708, March 7, 2007. (IF=3.979, Q1) [DOI]

[ 5 ] Young-Bin Park and Jonathan S. Colton, “Fatigue of Reinforced Polyurethane Dies in Sheet Metal Forming,” International Journal of Fatigue, 28, pp. 43-52, January 2006. (IF=1.546, Q1) [DOI]

[ 4 ] Young-Bin Park and Jonathan S. Colton, “Failure Analysis of Rapid Prototyped Tooling in Sheet Metal Forming ? Cylindrical Cup Drawing,” ASME Journal of Manufacturing Science and Engineering, 127, pp. 126-137, 2005. (IF=0.727, Q3) [DOI]

[ 3 ] Young-Bin Park and Jonathan S. Colton, “Failure Analysis of Rapid Prototyped Tooling in Sheet Metal Forming ? V-Die Bending,” ASME Journal of Manufacturing Science and Engineering, 127, pp. 116-125, 2005. (IF=0.727, Q3) [DOI]

[ 2 ] Young-Bin Park and Jonathan S. Colton, “Sheet Metal Forming Using Polymer Composite Rapid Prototyped Tooling,” ASME Journal of Engineering Materials and Technology, 125, pp. 247-255, 2003. (IF=0.954, Q2) [DOI]

[ 1 ] Young-Bin Park, Tae-Yong Kim, Joongwon Woo, Dongwon Shin, and Jongwon Kim, “Sliding Mode Cutting Force Regulator for Turning Processes,” International Journal of Machine Tools and Manufacture, 38, pp. 911-930, 1998. (IF=2.169, Top 10%) [DOI]